Home

Exhaust Transfer Blankets

UNIQUE HEATED PRODUCTS, INC.'s (UHPI's ) wrap around exhaust transfer blankets are typically used when pulling an emissions sample from the source, through a stainless steel or silicone hose, to an analyzer. They are used to keep the sample temperature from cooling below a point that may effect proper evaluation from either "hang-up" or condensation. Their insulating characteristics also offer an increased level of safety from burns for the operator.

Please refer to the bottom of this page for detailed information on the materials available, and application data, for our heated blankets.

FEATURES AND SPECIFICATIONS


Wrap Around blanket for 2" to 12" diameter hoses
Typical watt densities from .25 to 1.25 VA/in2
Silicone Coated Fiberglass or Reinforced Polyurethane  typical  exteriors
Aluminized Fiberglass or Silica-Cloth interiors
Velcro
tm, zipper or grommet & lace closures
Custom configurations for sample taps, probes and bends available.

Designed to serve as heated pads, these blankets are constructed essentially the same as our round blankets. Velcro straps, snaps and grommet flaps may be added to these blankets to secure them to tanks, molds and other objects as needed. Please consult the factory for these special closures. Use the download link below to obtain an Ordering & Part Number Guide.

FEATURES AND SPECIFICATIONS


Custom heating pad for diurnal testing
Typical watt densities from .25 to 5 VA/in2
Silicone Coated Fiberglass or Reinforced Polyurethane typical exteriors
Aluminized Fiberglass or Silica-Cloth interiors
Velcro flaps or grommet & lace closures for mounting bends available.

Drum and Pail Heaters
Drum Blankets are designed for heating or insulating fifty-five gallon drums and five-gallon pails for viscosity control, freeze protection and dispensing temperature-sensitive media. Our use of superior insulations and a completely uniform heating element applied to the blanket's entire inner (heated) surface creates the most temperature-stable heated blanket on the market today.

FEATURES AND SPECIFICATIONS


55 gal. Drum Heater

UHPI drum and pail heaters feature Velcro closures for easy installation & removal and come equipped with a 6 ft. power cord. They may be custom-configured with different exteriors, control mechanisms and rated extreme conditions.

Model 450-2913
1500 Watts, 120 VAC
Reinforced Polyurethane exterior
0 to 425 F built in electronic temperature controller
Velcro
flap closure

Model 450-2997
Same as above at 220 VAC

Model 450-2916
750 Watts, 120 VAC
Reinforced Polyurethane exterior
Operates with pre-set 100 F thermostat
Velcro flap closure

Model 450-2998
Same as above at 220 VAC

Model 450-1516
1500 Watts, 120 VAC
Silicone coated fiberglass exterior
J & K type thermocouples built-in
Velcro flap closure
External temperature controller required

Model 450-2999
Same as above at 220 VAC

You may also download Product Information Sheets or Request A Quote

Blanket Info Sheets

Request Heated Blanket Quote